Digital Equipment AlphaServer 1000 업그레이드 정보 - 페이지 14
{카테고리_이름} Digital Equipment AlphaServer 1000에 대한 업그레이드 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Equipment AlphaServer 1000 15 페이지. Cpu upgrade
Digital Equipment AlphaServer 1000에 대해서도 마찬가지입니다: 설치 정보 (8 페이지)
페이지 인쇄
Upgrading an AlphaServer 1000 System
To update a Windows NT system:
1. Load the Firmware Update compact disc into the drive and select "Install new
firmware."
2. Shut down the Windows NT operating system. Turn the system off and then on.
3. From the Boot menu, select "Supplementary." From the Supplementary menu, select
"Install new firmware."
4. Update the system, entering the following command at the update prompt:
APU-> update
5. Confirm the update:
APU-> verify
A successful update will produce the following display:
ARC Rom Verify Successful
SRM Rom Verify Successful
6. Exit from the Firmware Update Utility by pressing the Reset button or turning the
system off and on.
Updating Firmware Using the Network
To update the firmware using the network, refer to the Read Me instructions on the Web
Server.
Updating Firmware Using the Diskette Drive
To update a Digital UNIX or OpenVMS system using the diskette drive:
1. Insert the diskette with the new firmware version in the diskette drive.
2. Enter the following command at the SRM console prompt:
>>> boot dva0
3. Load and execute the update utility:
APU-> update
4. Turn the system off and on.
5. Confirm the update:
>>> show version
To update a Windows NT system using the diskette drive, follow the same procedure
outlined in "To Update a Windows NT System" above.
8