Digital Equipment DECserver 900TM 설치 매뉴얼 - 페이지 6

{카테고리_이름} Digital Equipment DECserver 900TM에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Equipment DECserver 900TM 16 페이지.

Installing Flash RAM

If you using a Flash RAM card for loading the operational software, perform the following:

Insert the Flash RAM card into the Flash RAM slot on the front of the module.

a. The Digital label should be on the same side as the DECserver 900TM logo on

the front panel of the module.

b. When properly inserted, the Flash RAM card protrudes from the front panel about 1/4 inch.

The Flash RAM card is keyed and cannot be inserted improperly.

The Flash RAM card can be hot swapped and may be inserted or removed at anytime. If you are boot-

ing from the Flash RAM card, insert it before powering the module or during the self-test phase.

Once you boot the DECserver 900TM, the card may be left in place or removed.

LKG–8091-93I

DECserver 900TM