Digital Equipment Prioris XL 5200 설치 매뉴얼 - 페이지 10

{카테고리_이름} Digital Equipment Prioris XL 5200에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Equipment Prioris XL 5200 17 페이지. Cpu powergrade kit

Prioris XL and XLDP Server Powergrade Kit

Reset Jumpers on the Main Logic Board

1. As described previously, power down the server.

2. Make sure that the following jumpers, shown in Figure 1, are set to disabled

to prevent any unauthorized update to your BIOS:

J41

BIOS upgrade

J50

Boot block update

Powergrade Installation

Remove the CPU Module

1. Place the antistatic wrist strap on your wrist and connect the grounding

clip to a non-painted metal surface of the computer's chassis.

2. Using a Phillips screwdriver, unscrew and remove the CPU module

retaining bracket (Figure 2).

3. Grasping both ends of the CPU module, carefully remove it from the main

logic board and place it on an antistatic surface.

Disabled (Off)

Move the jumper back to the default position

shown in Figure 1 (pin 1 to pin 2).