Digital Equipment Prioris XL 6000 Series 설치 매뉴얼 - 페이지 17

{카테고리_이름} Digital Equipment Prioris XL 6000 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Equipment Prioris XL 6000 Series 19 페이지. With pentium pro chip upgrade

페이지 인쇄

Check the CPU Speed Settings

Check the jumper settings on the main logic board to make sure the CPU speed is

set to 200 MHz and the other CPU Speed jumpers are removed.

Table 2. XL 6000 CPU Speed Jumper Settings

CPU Speed

200 MHz

166 MHz

180 MHz

Reset the Flash Program Jumper

Reset the following jumper on the main logic board to protect your BIOS:

J36-C1, pins 1 to 2

Install any Video Option Card

If you previously removed a video option card, you can install it again.

Replace the Panel and Reconnect the Cables

1. Install the left side panel and lock the server. The server will not power up

with the side panel removed.

2. Connect any cables and power cords previously removed to the back of

the server.

Jumper

Position

pins 1 to 2

J37G

J37F

pins 1 to 2

J37F

pins 2 to 3

Flash Program

Prioris XL 6000 Server PowerGrade

Description

Processor clock (default)

to Protect mode