Digital Equipment DEClaser 3500 설치 매뉴얼 - 페이지 7

{카테고리_이름} Digital Equipment DEClaser 3500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Equipment DEClaser 3500 16 페이지. Internal fax modem
Digital Equipment DEClaser 3500에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지)

페이지 인쇄

. . . . . . . . . . . . . . . . . . . . . . .

ELECTROSTATIC DISCHARGE

A discharge of static electricity from a finger or other conductor

may damage circuit boards or other static-sensitive devices. This

type of damage may reduce the life expectancy of the device. To

prevent electrostatic damage, observe the following precautions:

Avoid hand contact by transporting and storing parts in

static-safe containers.

Keep electrostatic-sensitive parts in their containers until

they arrive at static-free work stations.

Place parts on a grounded surface before removing them

from their container.

Avoid touching pins, leads, or circuitry.

Always be properly grounded when touching a static-

sensitive component or assembly.

GROUNDING METHODS

Use one or more of the following grounding methods when

handling or installing electrostatic-sensitive parts:

Use a flexible wrist strap with a minimum of 1 megohm ± 10

percent resistance in the ground cord that is connected to a

grounded workstation or the printer chassis. To provide

a proper ground, wear the strap snug against the skin.

Use heel straps, toe straps, or boot straps on both feet at

standing workstations. Stand on conductive floors or

dissipating floor mats.

Use conductive field service tools.

Use a portable field service kit with a folding static-

dissipating work mat.

If you do not have the proper grounding equipment, have an

Authorized Service Provider install the part.

For additional information on static electricity, or

NOTE:

assistance with the installation of this product, contact your

Authorized Service Provider.

Part Number 194683-001 - 08/12/94 - - Saved by digital - -

Rev # - File Name FAXMODM2.DOC