Siemens SIMATIC ET 200AL 매뉴얼 - 페이지 15

{카테고리_이름} Siemens SIMATIC ET 200AL에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC ET 200AL 32 페이지. 10-link digital output module dq 8x24vdc/2a 8xm12
Siemens SIMATIC ET 200AL에 대해서도 마찬가지입니다: 매뉴얼 (38 페이지), 매뉴얼 (50 페이지), 매뉴얼 (38 페이지), 매뉴얼 (37 페이지), 장비 매뉴얼 (46 페이지), 매뉴얼 (26 페이지), 장비 매뉴얼 (28 페이지), 장비 매뉴얼 (27 페이지), 매뉴얼 (25 페이지)

페이지 인쇄
Siemens SIMATIC ET 200AL 매뉴얼
Product overview
3.2 BusAdapter BA-Send 1xFC
Properties
The module has the following technical properties:
• BusAdapter for the direct connection of ET-Connection
• Connects the interface module via ET-Connection with the ET 200AL I/O modules
• Supports all ET 200AL I/O modules
The module supports the following functions:
• Identification data I&M 0 to 3. See system manual ET 200SP Distributed I/O System
(https://support.industry.siemens.com/cs/ww/en/view/58649293).
Maximum configuration
• 16 ET 200AL I/O modules
• 15 m bus cable between BusAdapter BA Send and the first ET 200AL I/O module and
between two ET 200AL I/O modules.
• Supported functions:
1)
Accessories
The following components must be ordered separately:
• Labeling strips
• Reference identification label
• Stripping tool for ET-Connection
• Bus cables for ET-Connection
See also
You will find additional information on accessories and the other components in the system
manuals ET 200AL Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/89254965) and the Accessories/Spare
parts section of the ET 200SP Distributed I/O System
(https://support.industry.siemens.com/cs/ww/en/view/58649293) system manual.
14
Function
Isochronous mode
Configuration control
Shared device
PROFIenergy
System redundancy S2
With IM 155-6 PN/3 HF and IM 155-6 PN/2 HF V4.2 or higher
Mixed configuration
ET 200SP
IM
CPU
⑥
--
⑥
⑥
⑥
⑥
⑥
--
●
--
1
Equipment Manual, 11/2020, A5E33344611-AD
ET 200AL I/O modules on
ET-Connection
--
⑥
⑥
⑥
●
1
Mixed configuration