ET 200AL IO-Link I/O modules Documentation Guide
TIA Selection Tool
With the TIA Selection Tool, you can select, configure and order devices for Totally Integrated
Automation (TIA).
This tool is the successor of the SIMATIC Selection Tool and combines the known
configurators for automation technology into one tool.
With the TIA Selection Tool, you can generate a complete order list from your product
selection or product configuration.
You can find the TIA Selection Tool on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109767888).
PRONETA
SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network
during commissioning. PRONETA has two core functions:
• The topology overview automatically scans the PROFINET and all connected components.
• The IO check is a fast test of the wiring and the module configuration of a plant.
You can find SIEMENS PRONETA on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/67460624).
SIMATIC S7-PCT
The Port Configuration Tool ("PCT") is PC-based software for the parameter assignment of
Siemens IO-Link master-modules and IO-Link devices from any manufacturer.
The IO-Link devices are integrated using the standardized device description "IODD" that is
available from the respective device manufacturer. S7-PCT supports the version 1.0 as well as
V1.1 of the IODD.
S7-PCT is called via the hardware configuration of the IO-Link masters from STEP 7; however,
it can also be started as "standalone" if the IO-Link master is not operated on a SIMATIC
controller or when STEP 7 is not used.
You can find additional information on IO-Link on the Internet
(https://new.siemens.com/global/en/products/automation/industrial-communication/io-
link.html).
8
IO-Link digital input/digital output module DIQ 16x24VDC/0,5A 8xM12 (6ES7143-5AH00-0BL0)
Equipment Manual, 08/2021, A5E47926885-AB
페이지 인쇄