Siemens SIMATIC ET 200AL 장비 매뉴얼 - 페이지 23

{카테고리_이름} Siemens SIMATIC ET 200AL에 대한 장비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC ET 200AL 28 페이지. 10-link digital output module dq 8x24vdc/2a 8xm12
Siemens SIMATIC ET 200AL에 대해서도 마찬가지입니다: 매뉴얼 (38 페이지), 매뉴얼 (50 페이지), 매뉴얼 (38 페이지), 매뉴얼 (32 페이지), 매뉴얼 (37 페이지), 장비 매뉴얼 (46 페이지), 매뉴얼 (26 페이지), 장비 매뉴얼 (27 페이지), 매뉴얼 (25 페이지)

페이지 인쇄
Siemens SIMATIC ET 200AL 장비 매뉴얼

Technical specifications

6.1
Technical specifications
Technical specifications of the DQ 8x24VDC/2A 8xM12 digital output module
The following table shows the technical specifications as of the issue date. You can find a
data sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7142-5AF00-0BA0/td?dl=en).
Article number
General information
Product type designation
HW functional status
Firmware version
Product function
•
I&M data
Engineering with
•
STEP 7 TIA Portal configurable/integrated
from version
•
STEP 7 configurable/integrated from ver-
sion
•
PROFIBUS from GSD version/GSD revision
•
PROFINET from GSD version/GSD revision
Supply voltage
Load voltage 1L+
•
Rated value (DC)
•
permissible range, lower limit (DC)
•
permissible range, upper limit (DC)
•
Reverse polarity protection
Load voltage 2L+
•
Rated value (DC)
•
permissible range, lower limit (DC)
•
permissible range, upper limit (DC)
•
Reverse polarity protection
Input current
Current consumption (rated value)
from load voltage 1L+ (unswitched voltage)
from load voltage 2L+, max.
22
6ES7142-5AF00-0BA0
DQ 8x24VDC/2A
FS03
V1.0.x
Yes; I&M0 to I&M3
STEP 7 V13 SP1 or higher
V5.5 SP4 Hotfix 7 or higher
GSD as of Revision 5
GSDML V2.3.1
24 V
20.4 V
28.8 V
Yes; against destruction; load increasing
24 V
20.4 V
28.8 V
Yes; against destruction; load increasing
40 mA; without load
4 A; Maximum value
4 A; Maximum value
Digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BA0)
Equipment Manual, 08/2021, A5E36683723-AB
6