Siemens SIMATIC ET 200iSP 설치 매뉴얼 - 페이지 19

{카테고리_이름} Siemens SIMATIC ET 200iSP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC ET 200iSP 50 페이지. Distributed i/o
Siemens SIMATIC ET 200iSP에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지)

Siemens SIMATIC ET 200iSP 설치 매뉴얼
Apply the following torques when clamping the cables using the cap nut:
 
Cable entry M16
Cable entry M20
Cable entry M25
Cable entry M32
Cable entry M40
The following cable clamping ranges apply for the cable entries:
 
Cable entry M16
Cable entry M20
Cable entry M25
Cable entry M32
Cable entry M40
To use smaller cable diameters, use reducing inserts of type RDE from the manufacturer
WISKA.
Refer to the respective manufacturer's documentation for more information and technical
specifications.
Before installation and commissioning, ensure that:
• the cable and conductor entries are not damaged,
• the cable and conductor entries are tightened in accordance with the recommended torques
and
• the cables and wires are properly inserted.
For cable and conductor entries that differ in type or manufacturer, refer to the information
and instructions provided in the respective manufacturer's documentation.
Relieve the tension on the cables outside the enclosure so that the cable gland is not stressed.
NOTICE
Closing the unused screw glands
Use the supplied red dummy plugs to close any cable glands not in use. Only then is it ensured
that the degree of protection is retained.
Distributed I/O device 6DL2804-1xxxx & 6DL2804-2xxxx
Hardware Installation Manual, 11/2023, A5E42025214-AC
Torque cap nut with cable en‐
tries made from polyamide,
manufacturer: WISKA, type:
ESKE/1-e and ESKE/1-i [Nm]
1.3
1.5
2.0
3.3
10.0
Clamping range for cable en‐
tries made from polyamide,
manufacturer: WISKA, type:
ESKE/1-e and ESKE/1-i [mm]
4.5-9
7-13
10-17
13-21
17-28
Description
4.6 Details of the enclosure
Torque cap nut with cable en‐
tries made from brass, manu‐
facturer: WISKA, type: EMSKE-L
[Nm]
4.0
8.0
10.0
20.0
20.0
Clamping range for cable en‐
tries made from brass, manu‐
facturer: WISKA, type: EMSKE-L
[mm]
5-10
6-13
10-17
13-21
16-28
17