Siemens simatic ET 200MP 매뉴얼 - 페이지 18

{카테고리_이름} Siemens simatic ET 200MP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens simatic ET 200MP 30 페이지. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Siemens simatic ET 200MP에 대해서도 마찬가지입니다: 매뉴얼 (40 페이지), 매뉴얼 (24 페이지), 매뉴얼 (29 페이지), 매뉴얼 (47 페이지), 매뉴얼 (26 페이지), 매뉴얼 (28 페이지), 매뉴얼 (50 페이지), 매뉴얼 (34 페이지), 사용자 설명서 (44 페이지), 매뉴얼 (25 페이지), 매뉴얼 (42 페이지), 매뉴얼 (28 페이지), 매뉴얼 (33 페이지), 매뉴얼 (49 페이지), 매뉴얼 (36 페이지), 매뉴얼 (39 페이지), 매뉴얼 (28 페이지), 장비 매뉴얼 (35 페이지), 장비 매뉴얼 (32 페이지), 매뉴얼 (29 페이지), 매뉴얼 (34 페이지), 매뉴얼 (36 페이지), 장비 매뉴얼 (50 페이지), 매뉴얼 (45 페이지)

Parameters/address space

4.3 Address space

Address space for configuration as 1 x 16-channel DQ 16x230VAC/1A ST MSO

For the configuration as a 1 x 16-channel module (module-internal Shared Output, MSO),

channels 0 to 15 of the module are copied to multiple submodules. Channels 0 to 15 are

then available with identical values in various submodules. These submodules can be

assigned to up to four IO controllers when the module is used in a shared device:

● The IO controller to which submodule 1 is assigned has write access to outputs 0 to 15.

● The IO controllers to which submodule 2, 3, or 4 is assigned have read access to outputs

0 to 15.

The number of IO controllers depends on the interface module being used. Please observe

the information in the manual for the particular interface module.

Value status (Quality Information, QI)

The meaning of the value status depends on the submodule involved.

For the 1st submodule (=basic submodule), the value status 0 indicates that the value is

incorrect or that the IO controller of the basic submodule is in STOP state.

For the 2nd to 4th submodule (=MSO submodule), the value status 0 indicates that the value

is incorrect or one of the following errors has occurred:

● The basic submodule is not yet configured (not ready).

● The connection between the IO controller and the basic submodule has been interrupted.

● The IO controller of the basic submodule is in STOP or POWER OFF state.

Digital output module DQ 16x230VAC/1A ST Triac (6ES7522-5FH00-0AB0)

Manual, 09/2016, A5E34934069-AB