Siemens simatic ET 200MP 매뉴얼 - 페이지 15

{카테고리_이름} Siemens simatic ET 200MP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens simatic ET 200MP 36 페이지. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Siemens simatic ET 200MP에 대해서도 마찬가지입니다: 매뉴얼 (40 페이지), 매뉴얼 (24 페이지), 매뉴얼 (29 페이지), 매뉴얼 (47 페이지), 매뉴얼 (26 페이지), 매뉴얼 (28 페이지), 매뉴얼 (50 페이지), 매뉴얼 (34 페이지), 사용자 설명서 (44 페이지), 매뉴얼 (30 페이지), 매뉴얼 (25 페이지), 매뉴얼 (42 페이지), 매뉴얼 (28 페이지), 매뉴얼 (33 페이지), 매뉴얼 (49 페이지), 매뉴얼 (39 페이지), 매뉴얼 (28 페이지), 장비 매뉴얼 (35 페이지), 장비 매뉴얼 (32 페이지), 매뉴얼 (29 페이지), 매뉴얼 (34 페이지), 매뉴얼 (36 페이지), 장비 매뉴얼 (50 페이지), 매뉴얼 (45 페이지)

Address space for configuration as 1 x 16-channel DQ 16x24VDC/0.5A BA MSO

For the configuration as a 1 x 16-channel module (module-internal Shared Output, MSO),

channels 0 to 15 of the module are copied to multiple submodules. Channels 0 to 16 are

then available with identical values in various submodules. These submodules can be

assigned to up to four IO controllers when the module is used in a Shared Device:

● The IO controller to which submodule 1 is assigned has write access to outputs 0 to 15.

● The IO controllers to which submodules 2, 3 or 4 are assigned have write access to the

outputs 0 to 15.

The number of usable submodules depends on the interface module used. Please observe

the information in the manual for the particular interface module.

Value status (Quality Information, QI)

The meaning of the value status depends on the submodule involved.

For the 1st submodule (=basic submodule), the value status 1 indicates that the output value

specified by the user program is actually output at the module terminal.

Possible causes for value status = 0:

● Value is incorrect, for example, because the supply voltage is missing.

● IO controller of the basic submodule is in STOP mode.

For the 2nd to 4th submodule (=MSO submodule), the value status 1 indicates that the

output value specified by the user program is actually output at the module terminal.

Possible causes for value status = 0:

● Value is incorrect, for example, because the supply voltage is missing.

● IO controller of the basic submodule is in STOP mode.

● The basic submodule is not yet configured.

Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0)

Manual, 09/2014, A5E32364017-AB

Address space

4.1 Address space