Epson XP-4105 빠른 시작 매뉴얼
{카테고리_이름} Epson XP-4105에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson XP-4105 4 페이지.
Epson XP-4105에 대해서도 마찬가지입니다: 빠른 매뉴얼 (17 페이지)
페이지 인쇄
XP-4100/XP-4105
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online
User's Guide.
Note:
This printer is designed for use with Epson
third-party cartridges or ink. For important ink information, visit
www.epson.com/epsonink (U.S.) or www.epson.ca/epsonink (Canada)
or see your printer box.
1
Unpack
Note:
Do not open ink cartridge packages until you are ready to install
the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit until it locks into place and
remove all protective materials from inside the product.
Caution:
Do not touch the flat white cable.
cartridges only, not
®
3
Lift the scanner unit up slightly and lower it. When
the scanner unit catches, lift it up again and lower it
completely.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Raise the control panel and turn on the product.
3
to select your language, then press OK.
Press
or
Note:
You can change the language later using the product's
control panel. For more information, see the online User's Guide.
3
Install ink cartridges
Caution:
Keep ink cartridges out of the reach of children and do not
drink the ink.
Note:
The included initial cartridges are designed for reliable printer
setup and cannot be used as replacement cartridges or resold. After
setup, the remaining ink is available for printing.
1
Lift up the scanner unit until it locks into place.