Siemens SIMATIC ET 200SP HA 장비 매뉴얼 - 페이지 16

{카테고리_이름} Siemens SIMATIC ET 200SP HA에 대한 장비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC ET 200SP HA 44 페이지. Distributed i/o devices busadapter for distributed i/o
Siemens SIMATIC ET 200SP HA에 대해서도 마찬가지입니다: 매뉴얼 (32 페이지), 매뉴얼 (50 페이지), 매뉴얼 (34 페이지), 매뉴얼 (38 페이지), 장비 매뉴얼 (50 페이지), 장비 매뉴얼 (38 페이지), 장비 매뉴얼 (46 페이지), 장비 매뉴얼 (42 페이지), 장비 매뉴얼 (44 페이지), 장비 매뉴얼 (36 페이지), 장비 매뉴얼 (38 페이지)

Siemens SIMATIC ET 200SP HA 장비 매뉴얼
Installation
4.3 BusAdapter BA 2xFC
Installing a BusAdapter to distributed I/O
To connect the PROFINET IO to the device via the BusAdapter BA 2xFC, proceed as directed
in the following figures:
Table 4-1
Object
Locking slide
Wire guide
Shield contact
PROFINET connecting cable
Connecting the cable to the BusAdapter
Figure 4-2
16
Objects in the figures
Push back the locking slide.
Open the cover of the connection element.
Flip up the wire guide until it stops.
4a
Insert the insulated single wires of the PROFINET IO cable (according to the printed color
coding) all the way into the wire guide.
4b
Lay the cable shield on the shield contact.
4c
Flip the wire guide firmly down until it stops.
5a
Close the cover of the connection element.
5b
Slide the locking slide forward until it stops.
Connecting the PROFINET IO cable to the BusAdapter BA 2×FC
Marking in the figures
I
II
III
IV
Equipment Manual, 09/2019, A5E39261458-AB
BusAdapter for Distributed I/O