Siemens SIMATIC NET 사용 설명서 - 페이지 26

{카테고리_이름} Siemens SIMATIC NET에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC NET 28 페이지. Network components bus terminal
Siemens SIMATIC NET에 대해서도 마찬가지입니다: 사용 설명서 (29 페이지), 사용 설명서 (50 페이지), 조립 지침 매뉴얼 (6 페이지), 제품 정보 (6 페이지), 설치 매뉴얼 (40 페이지), 설치 매뉴얼 (50 페이지), 설치 매뉴얼 (40 페이지), 참조 매뉴얼 (14 페이지), 설치 매뉴얼 (34 페이지), 설치 매뉴얼 (48 페이지), 사용 설명서 (32 페이지)

Approvals

cULus approval for industrial control equipment

cULus Listed IND. CONT. EQ.

Underwriters Laboratories Inc. complying with

● UL 508

● CSA C22.2 No. 142-M1987

Report no. E85972

cULus Approval, Hazardous Location

cULus Listed 7RA9 IND. CONT. EQ. FOR HAZ. LOC.

Underwriters Laboratories Inc. complying with

● UL 508 (Industrial Control Equipment)

● CSA C22.2 No. 142 (Process Control Equipment)

● ANSI ISA 12.12.01, CSA C22.2 No. 213-M1987 (Hazardous Location)

APPROVED for Use in

● Cl. 1, Div. 2, GP. A, B, C, D T3...T6

● Cl. 1, Zone 2, GP. IIC T3...T6

You will find the temperature class on the type plate on the module.

Explosion hazard

Do not disconnect while circuit is live unless area is known to be non hazardous.

Substitution of components may impair suitability for Class I, Division 2.

Note

This equipment is suitable for use in Class I, Division 2, Group A, B, C, D or non-hazardous

locations only.

Note

This plant has to be mounted according to the NEC (National Electrical Code) stipulations.

When used in environments according to class I, division 2 (see above), the bus terminals

must be mounted in an enclosure.

WARNING

Operating Instructions, 07/2013, C79000-G8976-C333-01

12M bus terminal