Siemens SIMATIC NET APE1404 구성 매뉴얼 - 페이지 34

{카테고리_이름} Siemens SIMATIC NET APE1404에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC NET APE1404 36 페이지. Application processing engine

Frequently Asked Questions

General

Linux

RUGGEDCOM APE (Application Processing Engine)

Configuration Manual, 12/2019, C79000-G8976-1121-05

How do I power a USB DVD-ROM drive or USB hard disk using the RUGGED-

COM APE USB port?

The RUGGEDCOM APE USB port is limited in the amount of power it can pro-

vide. Use a powered hub to employ devices such as these.

How can I re-install the software platform on the RUGGEDCOM APE?

There are two possible options:

•

Return the RUGGEDCOM APE module to Siemens and request a re-install.

This service is not covered by warranty.

•

Restore the backup image that was made before commissioning the

RUGGEDCOM APE module.

Note

Siemens does not provide recovery images for Check Point GAiA. Recovery

images must be obtained from https://www.checkpoint.com/.

How do I recover an image of the original factory settings?

Siemens strongly recommends creating a backup image of the RUGGEDCOM

APE before it is configured. If this image is available, it can be easily restored.

If an original backup image is not available, contact Siemens Customer Support

for assistance. In most cases, the RUGGEDCOM APE module must be returned

to the factory to be re-imaged. This service is not covered by warranty.

Does the RUGGEDCOM APE support a Real Time Operating System (RTOS)?

The software distributed by Siemens does not include an RTOS component.

However, this software could be installed.

Does the RUGGEDCOM APE have a serial port?

The RUGGEDCOM APE does not have serial ports.