Siemens SIMATIC NET APE1404CKP 구성 매뉴얼 - 페이지 18

{카테고리_이름} Siemens SIMATIC NET APE1404CKP에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC NET APE1404CKP 36 페이지. Application processing engine

If you do not wish the RUGGEDCOM APE to receive these BPDUs, they may be

disabled in RUGGEDCOM RUGGEDCOM APE in the interface switch menu for the

RUGGEDCOM APE interface.

1.10.2

Example: RX15xx Services and WAN Networking

The following illustration shows how the RUGGEDCOM APE might be used in a more

complex situation in which it is routed as opposed to bridged. The use of internal ser-

ial ports, firewalls, and port forwarding is discussed.

Figure 1.4

In this scenario, the RUGGEDCOM APE is reached via a routed interface. This is ac-

complished by moving the RUGGEDCOM APE port onto its own VLAN, and creating a

point-to-point connection between it and the control module.

The figure shows six serial ports available on serial LM 3. In order to become net-

work-accessible, these ports must be configured as socket ports that allow incom-

ing calls on TCP ports 5001 (ser-3-1) through 5006 (ser-3-6). While any address on

the RX1500 control module may be used to connect the RUGGEDCOM APE to these

ports, switch.0001, switch.0002, and dummy0 addresses are recommended. In par-

ticular, dummy0 addresses are useful when router redundancy is implemented.

As in the previous scenario, devices on the 192.168.0.0/24 subnet are still available

to the RUGGEDCOM APE; however, in this scenario, they are available through rout-

ing.

RUGGEDCOM APE (Application Processing Engine)

Configuration Manual, 12/2019, C79000-G8976-1121-05

1.10.2 Example: RX15xx Services and WAN Networking

Example Configuration

Overview