Siemens SIMATIC RF685R 시작하기 - 페이지 3
{카테고리_이름} Siemens SIMATIC RF685R에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC RF685R 27 페이지.
Siemens SIMATIC RF685R에 대해서도 마찬가지입니다: 시작하기 (2 페이지)
페이지 인쇄
CAUTION
Installing/uninstalling with power off
Wire up the PC or the SIMATIC controller and the modules and readers to be connected only when the power is off.
Make sure that the power supply is turned off when installing/uninstalling the devices.
CAUTION
Maintaining the degree of protection IP65 with RF615R, RF680R and RF685R
Connect all external plugs and use the protective caps to maintain the degree of protection.
NOTE
Open Source Software
You can find the copyright information of the Open Source Software included in this product and its license terms as
downloadable file on the device.
You can access these via the Web Based Management of the device (WBM > Help > Readme OSS).
NOTE
Using secure protocols
Note that the secure HTTPS protocol must be used ex works for device access via a web browser. The HTTP protocol is
disabled for security reasons but can be re-enabled at a later time if necessary.
Further Information
You will find more detailed information on the SIMATIC Ident products here:
"SIMATIC RF600" system manual
•
"SIMATIC RF600" configuration manual
•
Siemens Industry Online Support pages:
•
Setup
For commissioning, you require at least the following components:
RF600R reader
•
Wide-range power supply unit
•
Connecting cable reader ↔ wide-range power supply unit
•
Ethernet/PROFINET cable
•
Transponder (EPC global Class 1 Gen 2)
•
For the RF650R and RF680R readers you also require the following:
Antenna
•
Antenna cable
•
https://support.industry.siemens.com/cs/ww/en/ps/15069/man
3