Siemens SIMATIC RTLS4460T 사용 설명서 - 페이지 15

{카테고리_이름} Siemens SIMATIC RTLS4460T에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC RTLS4460T 22 페이지. Localization systems
Siemens SIMATIC RTLS4460T에 대해서도 마찬가지입니다: 장치 설명서 (14 페이지)

페이지 인쇄

Installation & Operation

3.1

Notes on installation

Note

Before you install the devices, read this section carefully to ensure trouble-free installation

and commissioning.

The devices can only be used in conjunction with the RTLS localization system.

The device is intended for installation in a vehicle. Installation is to be performed by qualified

and trained users according to the operating instructions. In addition, installation must take

place in accordance with the respective instructions for the installation of electrical systems

and utilities.

Note the specifications in the section "Technical specifications (Page 17)" during installation

and operation. Protect the device against moisture.

Make sure that the ambient temperature does not exceed 70 °C and that the device is not

installed in a location where it is exposed to direct sunlight.

Connection of the cables

Make sure that the wiring is correct before you start up the device.

Connection of the antenna

Connect the antenna to the RP SMA connector (ANT1). The device must not be operated

without an antenna. The device must be turned off or disconnected from the power to

change or remove the antenna.

Supply voltage

When the supply voltage is connected, all LEDs light up for 1 second.

Check whether the rated voltage of the power supply corresponds to the values in the section

"Technical specifications (Page 17)".

SIMATIC RTLS4460T

Operating Instructions, 05/2021, C79000-G8976-C522-04