Epson XP-441 여기에서 시작
{카테고리_이름} Epson XP-441에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson XP-441 4 페이지.
페이지 인쇄
XP-441
Start Here
Read these instructions before using your product.
1
Unpack
Note:
Do not open ink cartridge packages until you are ready to install
the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit and remove all protective materials
from inside the product.
Caution:
Do not touch the flat white cable.
3
Lower the scanner unit.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Raise the control panel and turn on the product.
Caution:
Do not lower the control panel without first squeezing
the release bar underneath or you may damage the product.
3
to select your language, then press OK.
Press
or
Note:
You can change the language later using the product's
control panel. For more information, see the online User's Guide.
3
Install ink cartridges
Caution:
Keep ink cartridges out of the reach of children and do not
drink the ink.
1
Lift up the scanner unit.
Caution:
Do not touch the flat, white cable.
2
Gently shake the ink cartridges.