Siemens Simatic S7-1500 매뉴얼 - 페이지 19

{카테고리_이름} Siemens Simatic S7-1500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-1500 36 페이지. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Siemens Simatic S7-1500에 대해서도 마찬가지입니다: 매뉴얼 (40 페이지), 매뉴얼 (37 페이지), 매뉴얼 (47 페이지), 매뉴얼 (24 페이지), 매뉴얼 (34 페이지), 사용자 설명서 (45 페이지), 매뉴얼 (27 페이지), 구성 매뉴얼 (20 페이지), 매뉴얼 (47 페이지), 매뉴얼 (43 페이지), 매뉴얼 (48 페이지), 매뉴얼 (26 페이지), 매뉴얼 (28 페이지), 매뉴얼 (50 페이지), 매뉴얼 (34 페이지), 사용자 설명서 (44 페이지), 매뉴얼 (50 페이지), 매뉴얼 (30 페이지), 매뉴얼 (41 페이지), 매뉴얼 (50 페이지), 매뉴얼 (40 페이지), 안전 프로그래밍 매뉴얼 (48 페이지), 통신 사용 설명서 (36 페이지), 매뉴얼 (40 페이지), 매뉴얼 (25 페이지), 매뉴얼 (42 페이지), 애플리케이션 설명 (50 페이지), 매뉴얼 (28 페이지), 매뉴얼 (33 페이지), 매뉴얼 (49 페이지), 매뉴얼 (41 페이지), 매뉴얼 (46 페이지), 매뉴얼 (38 페이지), 매뉴얼 (35 페이지), 매뉴얼 (39 페이지), 매뉴얼 (28 페이지), 매뉴얼 (35 페이지), 장비 매뉴얼 (35 페이지), 매뉴얼 (50 페이지), 장비 매뉴얼 (32 페이지), 장비 매뉴얼 (38 페이지), 매뉴얼 (29 페이지), 장비 매뉴얼 (38 페이지), 매뉴얼 (34 페이지), 매뉴얼 (36 페이지), 장비 매뉴얼 (50 페이지), 매뉴얼 (45 페이지)

Siemens Simatic S7-1500 매뉴얼
Meaning of the LED displays
The tables below explain the meaning of the status and error displays.
LED RUN/ERROR
Table 5- 1
RUN/ERROR status and error displays
LED
RUN
ERROR
Off
Off
Flashes
Off
On
Off
Flashes
Flashes
LED PWR1/PWR2
Table 5- 2
PWR1/PWR2 status display
LED PWRx
Off
On
LED CHx
Table 5- 3
CHx status display
LED CHx
Off
On
Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0)
Manual, 09/2014, A5E32364017-AB
Meaning
Voltage missing or too low at backplane bus.
Module is starting up.
Module is ready.
Hardware defective.
Meaning
Supply voltage L+ too low or missing.
Supply voltage L+ is present and OK.
Meaning
0 = Status of the output signal.
1 = Status of the output signal.
5.1 Status and error displays
Remedy
Switch on the CPU and/or the system pow-
er supply modules.
Verify that the U connectors are inserted.
Check to see if too many modules are in-
serted.
---
Replace the module.
Remedy
Check the L+ supply voltage.
---
Remedy
---
---
Diagnostics alarms
19