Siemens Simatic S7-1500/ET 200MP 매뉴얼 - 페이지 16

{카테고리_이름} Siemens Simatic S7-1500/ET 200MP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-1500/ET 200MP 41 페이지. Digital input module di 16x24vdc ba
Siemens Simatic S7-1500/ET 200MP에 대해서도 마찬가지입니다: 장비 매뉴얼 (34 페이지), 매뉴얼 (28 페이지), 매뉴얼 (35 페이지)

페이지 인쇄

Interference frequency suppression

At analog input modules, this suppresses interference caused by the frequency of the AC

network.

The frequency of the AC voltage network may interfere with measured values, particularly for

measurements within narrow voltage ranges. For this parameter, the user defines the mains

frequency prevailing on his system.

Smoothing

The individual measured values are smoothed using filtering. The smoothing can be set in 4

levels.

Smoothing time = number of module cycles (k) x cycle time of the module.

The following figure shows the number of module cycles after which the smoothed analog

value is almost 100%, depending on the set smoothing. It is valid for each signal change at

the analog input.

①

②

③

④

Figure 4-1

Hardware interrupt 1 or 2

Enabling of a hardware interrupt at violation of high limit 1 or 2 or low limit 1 or 2.

Analog input module AI 16xU BA (6ES7531-7LH00-0AB0)

Equipment Manual, 09/2020, A5E47052556-AA

None (k = 1)

Weak (k = 4)

Medium (k = 16)

Strong (k = 32)

Smoothing for AI 16xU BA

Parameters/address space

4.3 Declaration of parameters