Siemens SIMATIC S7-1500R/H 매뉴얼 - 페이지 16
{카테고리_이름} Siemens SIMATIC S7-1500R/H에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC S7-1500R/H 46 페이지. Cpu 1515r-2 pn (6es7515-2rm00-0ab0)
Siemens SIMATIC S7-1500R/H에 대해서도 마찬가지입니다: 매뉴얼 (42 페이지), 장비 매뉴얼 (44 페이지), 매뉴얼 (45 페이지), 장비 매뉴얼 (44 페이지)
페이지 인쇄
Properties
CPU 1517H-3 PN has the following technical properties:
Property
CPU display
Supply voltage
CPU 1517H-3 PN (6ES7517-3HP00-0AB0)
Equipment Manual, 11/2019, A5E42011886-AB
Description
All CPUs of the redundant system S7 1500R/H have a
display with plain text information. The display provides
you with diagnostic messages as well as information
about the article number, the firmware version and the
serial number of the CPU.
You can also view and assign the IP addresses, the
PROFINET device name and the redundancy ID of the
CPU. The system IP address can be viewed via
STEP 7 but not in the display.
In addition to the functions listed here, a large number
of other functions are available on the display. These
additional functions are described in the SIMATIC S7
1500 Display Simulator.
The 24 V DC supply voltage is fed via a 4-pin plug
located on the front of the CPU.
Product overview
2.3 Hardware properties
Additional information
Redundant System S7-1500R/H
•
(https://support.industry.siemens.
com/cs/ww/en/view/109754833)
System Manual
SIMATIC S7-1500 Display Simu-
•
lator
(http://www.automation.siemens.
com/salesmaterial-as/interactive-
manuals/getting-started_simatic-
s7-1500/disp_tool/start_en.html)
Section Connecting (Page 25)
•
Redundant System S7-1500R/H
•
(https://support.industry.siemens.
com/cs/ww/en/view/109754833)
System Manual
15