Siemens SIMATIC S7-1500R/H 장비 매뉴얼 - 페이지 21

{카테고리_이름} Siemens SIMATIC S7-1500R/H에 대한 장비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC S7-1500R/H 44 페이지. Cpu 1515r-2 pn (6es7515-2rm00-0ab0)
Siemens SIMATIC S7-1500R/H에 대해서도 마찬가지입니다: 매뉴얼 (42 페이지), 매뉴얼 (46 페이지), 매뉴얼 (45 페이지), 장비 매뉴얼 (44 페이지)

페이지 인쇄

Pulling and plugging the front panel with display

You can pull and plug the front panel with display during operation.

Personal injury and damage to property may occur

If you remove or attach the front panel of a redundant system S7‑1500R/H during operation,

personal injury or damage to property can occur in hazardous area zone 2.

Before you remove or fit the front panel, always switch off the power supply to the

S7‑1500R/H redundant system in hazardous area zone 2.

Locking the front panel

You can lock the front panel to protect the SIMATIC memory card and the mode selector of

the CPU against unauthorized access.

You can attach a security seal or a padlock with a hoop diameter of 3 mm to the front panel.

Figure 3-4 Locking latch on the CPU

In addition to the mechanical lock, you can also block access to a password-protected CPU on

the display (local lock) and assign a password for the display. You can find additional

information on the display, the configurable protection levels and the local lock in the system

manual for Redundant System S7‑1500R/H

(https://support.industry.siemens.com/cs/ww/en/view/109754833).

Reference

You can find detailed information on the individual display options, a training course and a

simulation of the available menu commands in the SIMATIC S7-1500 Display Simulator

(https://support.industry.siemens.com/cs/ww/en/view/109761758).

CPU 1517H-3 PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2022, A5E42011886-AD

WARNING

3.5 Operator controls and display elements

Product overview