Siemens SIMATIC S7-1500R/H 매뉴얼 - 페이지 11
{카테고리_이름} Siemens SIMATIC S7-1500R/H에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC S7-1500R/H 45 페이지. Cpu 1515r-2 pn (6es7515-2rm00-0ab0)
Siemens SIMATIC S7-1500R/H에 대해서도 마찬가지입니다: 매뉴얼 (42 페이지), 매뉴얼 (46 페이지), 장비 매뉴얼 (44 페이지), 장비 매뉴얼 (44 페이지)
페이지 인쇄
New functions
MRP interconnection
Simulation of R/H-CPUs
OB 72 (CPU redundancy
error)
"RH_CTRL" instruction
Instructions for recipe
phases
Technology objects
TO_BasicPos and
SSI_Absolute_Encoder
CPU 1515R-2 PN (6ES7515-2RN03-0AB0)
Equipment Manual, 11/2022, A5E42009914-AD
Customer benefits
The MRP interconnection procedure is an extension of
MRP. MRP interconnection enables the redundant
coupling of 2 or more rings with MRP in PROFINET net
works.
MRP interconnection offers the following advantages:
•
When setting up redundant network topologies,
there is no limitation to the maximum number of
devices of 50 devices in a ring.
•
Monitoring of larger topologies with ring redund
ancy.
PLCSIM Advanced V4.0 supports simulation of R/H-
CPUs
•
Virtual commissioning of machines with R/H-CPUs
in a system
•
Automatic testing of the STEP 7 user program
The simulation offers the following advantages:
•
Early error detection and risk minimization
•
Reduced response times
•
No hardware costs
As of FW version V2.9, the operating system calls
OB 72 on further events:
•
The R/H-system has entered RUN-Redundant sys
tem state and the synchronization of the two R/H-
CPUs is possible redundantly.
•
The R/H-system has entered RUN-Redundant sys
tem state, but the synchronization of the two R/H-
CPUs is not possible redundantly.
•
The R/H-system is still in RUN-Redundant system
state and the synchronization of the two R/H-CPUs
is possible redundantly now or again.
•
The R/H-system is still in RUN-Redundant system
state, but the synchronization of the two R/H-CPUs
is no longer possible redundantly.
As of FW version V2.9, the "RH_CTRL" instruction sup
ports additional functions:
•
Request SYNCUP
•
Switch primary CPU to STOP mode (only in RUN-
Redundant system state)
•
Switch backup CPU to STOP mode
As of FW version V2.9, the instructions for recipe
phases supports:
•
RecipeExport (export recipe)
•
RecipeImport (import recipe)
Technology object "TO_BasicPos"
You use the "TO_BasicPos" instruction to cyclically con
trol a SINAMICS drive with the technology for SINAM
ICS S/G/V basic positioners.
Technology object SSI_Absolute_Encoder
You use the "SSI_Absolute_Encoder" instruction to con
trol position detection and measuring functions of the
TM PosInput technology module via the user program.
Product overview
3.1 New functions
Where can I find information?
PROFINET Function Manual
(http://support.automation.siemens.
com/WW/view/en/49948856)
S7-PLCSIM Advanced Function Manual
(https://support.industry.siemens.
com/cs/ww/en/view/109773484)
S7-1500R/H System Manual
(https://support.industry.siemens.
com/cs/ww/en/view/109754833)
Online help for STEP 7
11