Siemens Simatic S7-300 사용자 설명서 - 페이지 10

{카테고리_이름} Siemens Simatic S7-300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-300 34 페이지. Automation systems, controlling a physical axis
Siemens Simatic S7-300에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지), 운영 지침 (4 페이지), 운영 지침 (5 페이지), 매뉴얼 (35 페이지), 시작하기 (8 페이지), 시작하기 (16 페이지), 애플리케이션 설명 (24 페이지), 매뉴얼 (18 페이지), 매뉴얼 (32 페이지), 설치 및 하드웨어 매뉴얼 (20 페이지), 시작하기 (32 페이지)

페이지 인쇄

ETH Adapter CN adapter has been installed on the S7-300PLC rail

5.ETH Adapter CN parameters setting

ETH Adapter CN needs to be configured the parameters to work correctly, the configuration

parameters including the network parameters, communication protocols, connection, serial port

parameters; it can be very flexible to satisfy your application. Configuration parameters are

stored in the Flash memory, and they can be permanently stored without loss.

Use the standard RJ45 cable to connect the ETH Adapter CN and router or switch, at the same

time make sure that the router or switch

is connected to a computer in order to run the

parameters setting software .You also can use a standard RJ45 cable to directly connect ETH

Adapter CN and the computer, no need

crossover cable, this product has auto-polarity

discrimination function for the RJ45 cable.

Insert the DP/MPI plug（DB9M）of ETH Adapter CN into the DP or MPI socket of the

S7-300/400PLC and power on the PLC.

The same local area network (router) can connect multiple ETH Adapter CN, but the same IP

address is not allowed, there will be conflicts if the same IP , and it only shows one of IP and

abnormality.

You can press the Default button on the ETH Adapter CN any time that could make it restore to the

factory dafault.

IP=192.168.0.250，Username=admin，Password=admin

You need to check your computer's IP address and gateway address, and confirm your computer

is in the normal Internet access, in the next setting, you need to set the gateway of ETH Adapter

CN as same as the gateway of computer and router, that is to say, the ETH Adapter CN and

computer are in the same subnet, all equipments in this subnet and routers have the same

gateway.

- 10 -