Siemens Simatic S7-300 운영 지침 - 페이지 5

{카테고리_이름} Siemens Simatic S7-300에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-300 5 페이지. Automation systems, controlling a physical axis
Siemens Simatic S7-300에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 매뉴얼 (21 페이지), 운영 지침 (4 페이지), 매뉴얼 (35 페이지), 시작하기 (8 페이지), 시작하기 (16 페이지), 애플리케이션 설명 (24 페이지), 매뉴얼 (18 페이지), 매뉴얼 (32 페이지), 설치 및 하드웨어 매뉴얼 (20 페이지), 시작하기 (32 페이지)

페이지 인쇄

Changes in comparison to the previous version

The following table contains changes from the previous versions of the following

documentation from the S7-300 documentation package:

● Technical specifications manual, version 06/2010

● Operating instructions for installation, version 06/2010

The CPU- 314C-2 PN/DP has been added in delivery stage V3.3. It has the same

functionalities as the CPU 314C-2 DP and also has PROFINET functionalities such as those

of the CPU 315-2 PN/DP.

In delivery stage V3.3, the functionality and performance of all C-CPUs and the CPU 317-2

DP were improved compared to their predecessor versions.

Additional information was taken from the chapter "Information on converting to a CPU 31xC

or CPU 31x". If you required more information, however, please refer to the FAQs () on the

Internet.

CPU

312

Encryption of blocks

using S7-Block

Privacy

Integration of a

maintenance LED

Configurable

increase of control

and monitoring

performance

Improved operational

limits for PT100

Analog input

Data set routing

Configurable process

image

Expansion of the

block number range

Number of displayed

diagnostic buffer

entries can be

configured in CPU

RUN mode

Reading out the

service data

Extension of SFC 12

with 2 new modes to

trigger the OB 86

during

enabling/disabling

Copying of 512 bytes

with SFC 81

CPU 31xC and CPU 31x: Installation

Operating Instructions, 03/2011, A5E00105492-12

312C

313C

1, 2

313C-2

314

PtP

1, 2

314C-2

315-2

PtP

1, 2

Preface

317-2