Siemens Simatic S7-300 매뉴얼 - 페이지 18

{카테고리_이름} Siemens Simatic S7-300에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-300 18 페이지. Automation systems, controlling a physical axis
Siemens Simatic S7-300에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 매뉴얼 (21 페이지), 운영 지침 (4 페이지), 운영 지침 (5 페이지), 매뉴얼 (35 페이지), 시작하기 (8 페이지), 시작하기 (16 페이지), 애플리케이션 설명 (24 페이지), 매뉴얼 (32 페이지), 설치 및 하드웨어 매뉴얼 (20 페이지), 시작하기 (32 페이지)

Error Messages

Error messages are displayed on the screen of Display as follows: "No. : Device Name: Error Message (Error

Occurrence Area)". Each description is shown below.

Item

No.

Device Name

Error Message

Error Occurrence Area

Display Examples of Error Messages

"RHAA035: PLC1: Error has been responded for device write command (Error Code: 2 [02H])"

• Please refer to the manual of External Device for more detail of received error codes.

• Please refer to "Display-related errors" of "Maintenance/Troubleshooting Guide" for a

GP-Pro EX Device/PLC Connection Manual

Error No.

Name of External Device where error occurs. Device name is a title of External Device set

with GP-Pro EX.((Initial value [PLC1])

Displays messages related to the error which occurs.

Displays IP address or device address of External Device where error occurs, or error codes

received from External Device.

• IP address is displayed such as "IP address (Decimal): MAC address (Hex)".

• Device address is displayed such as "Address: Device address".

• Received error codes are displayed such as "Decimal [Hex]".

common error message to the driver.

Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver

Description