Siemens Simatic S7-300 매뉴얼 - 페이지 32

{카테고리_이름} Siemens Simatic S7-300에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-300 32 페이지. Automation systems, controlling a physical axis
Siemens Simatic S7-300에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 매뉴얼 (21 페이지), 운영 지침 (4 페이지), 운영 지침 (5 페이지), 매뉴얼 (35 페이지), 시작하기 (8 페이지), 시작하기 (16 페이지), 애플리케이션 설명 (24 페이지), 매뉴얼 (18 페이지), 설치 및 하드웨어 매뉴얼 (20 페이지), 시작하기 (32 페이지)

3.3

Output Ranges of the Analog Output Module SM 332;

AO 4 16 bits

Connecting the analog outputs

You can connect the outputs as voltage or current outputs, or disable them. You

perform connection of the outputs with the "output type" parameter in STEP 7.

Unused channels

So that unused output channels of the SM 332; AO 4

de-energized, you must set the "output type" parameter to "disabled" and leave the

terminal open.

Output ranges

You program the output ranges for voltage and current outputs in STEP 7.

Table 11

Selected Type of Output

Voltage

Current

Default settings

The default settings of the module are "Voltage" for the output type and "" 10 V"

for the output range. You can use this combination of output type and output range

without parameterizing the SM 332; AO 4

Substitute values

You can configure the SM 332; AO 4

as follows: Outputs De-energized, Hold Last Value or Inject Substitute Values. If

you inject substitute values, they must be within the output range.

Output Ranges of the Analog Output Module SM 332; AO 4

1 to 5 V

0 to 10 V

" 10 V

0 to 20 mA

4 to 20 mA

" 20 mA

Product Information on the Manual S7-300 Module Specifications, Edition 11/2002

Output Range

16 bits in STEP 7.

16 bits for the CPU operating mode STOP

16 bits remain

16 bits

Description

You will find the digital

analog values in Section

4.3.2 (of the reference

manual) in the voltage and

current output ranges

A5E00213444-02