Siemens Simatic S7-300 시작하기 - 페이지 26

{카테고리_이름} Siemens Simatic S7-300에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-300 32 페이지. Automation systems, controlling a physical axis
Siemens Simatic S7-300에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 매뉴얼 (21 페이지), 운영 지침 (4 페이지), 운영 지침 (5 페이지), 매뉴얼 (35 페이지), 시작하기 (8 페이지), 시작하기 (16 페이지), 애플리케이션 설명 (24 페이지), 매뉴얼 (18 페이지), 매뉴얼 (32 페이지), 설치 및 하드웨어 매뉴얼 (20 페이지)

Learning units

3.10 9. Step: Configuring the drive with SimoComU

Step

Activity

In the SIMATIC Manager, select the Options > Set PG/PC

interface menu command in order to change the MPI

transmission rate to 1.5 Mbit/s.

Select the MPI interface. Click the properties and then

change the transmission speed and confirm all open dialog

boxes with "OK".

In the left half of the SIMATIC Manager window, select the

SIMATIC 300(1) > CPU 317T-2 DP > S7-Programm >

Blocks entry.

Select the Target system > Load menu command in order to

load the blocks and the system data to the CPU.

Confirm the message box

Download system data

•

Overwrite existing system data

•

3.10

9. Step: Configuring the drive with SimoComU

Procedure

Step

Activity

Connect SIMODRIVE 611U to the serial interface of your

PG/PC.

Run SimoCom U.

Result: The dialog box shown below opens:

Click "Search for online drives".

Result: SimoCom U automatically searches for the connected drive.

The configuration is opened.

Result

The system data blocks are downloaded to

the CPU. The initial download of your SDBs

may take longer (up to a few minutes),

because of their larger data volume.

Result

CPU 317T-2 DP: Controlling a physical axis

Getting Started, 03/2008, A5E00251786-05