Siemens Simatic S7-300 시작하기 - 페이지 8

{카테고리_이름} Siemens Simatic S7-300에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-300 32 페이지. Automation systems, controlling a physical axis
Siemens Simatic S7-300에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 매뉴얼 (21 페이지), 운영 지침 (4 페이지), 운영 지침 (5 페이지), 매뉴얼 (35 페이지), 시작하기 (8 페이지), 시작하기 (16 페이지), 애플리케이션 설명 (24 페이지), 매뉴얼 (18 페이지), 매뉴얼 (32 페이지), 설치 및 하드웨어 매뉴얼 (20 페이지)

Preparation

2.2 Task

● The configuration is completely installed and wired. For information, refer to

● You provided hardware limit switches and EMERGENCY-OFF switches for safe and

2.2

Task

Example configuration

Note

For the example of a drive in Getting Started we use a SIMODRIVE 611 universal

training case. This training case is available under the following order number:

• 6ZB2420-0AB00 or

• 6SN1182-0EA00-3DP0 or

• 6AU1700-8AA00-0AA0

Started CPU 31x: Commissioning

reliable operation of the system.

WARNING

Operation of an S7-300 as part of plants or systems is subject to special rules and

regulations, based on its field of application. Please note the current safety regulations

for the prevention of accidents, e.g. IEC 204 (EMERGENCY-OFF equipment). You risk

severe injury, or damage to machines and equipment if you ignore these directives.

CPU 317T-2 DP: Controlling a physical axis

Getting Started, 03/2008, A5E00251786-05

Getting