Siemens Simatic S7-400 매뉴얼 - 페이지 10

{카테고리_이름} Siemens Simatic S7-400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-400 35 페이지. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Siemens Simatic S7-400에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 시작하기 (36 페이지)

Siemens Simatic S7-400 매뉴얼
Micro Automation Set 14
Layout diagram of Micro Automation Set 14 – WinAC "Backup"
S7-WinAC "Backup
230V~
1
24V
+ -
WinAC "Backup" consists of a SIMATIC MicroBox PC 420 (2). The
integrated Ethernet interface is connected to SCALANCE X108 (3) of
S7-200 "Basis" via an Industrial Ethernet FC standard cable with RJ45
plugs.
LOGO!Power 4A (1) provides the 24V power supply.
Layout diagram of Micro Automation Set 14 – WinCC flexible "HMI"
A standard PC with Ethernet interface and installed operating system MS
Windows 2000 or MS Windows XP Professional is required for the WinCC
flexible "HMI" station. WinCC flexible 2005 Advanced is used as
visualization software.
V2.0
Entry ID 21062588
"
2
05/18/05
Configuration
S7-200 "Basis
"
3
10/35