Siemens Simatic S7-400 매뉴얼 - 페이지 21

{카테고리_이름} Siemens Simatic S7-400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-400 35 페이지. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Siemens Simatic S7-400에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 시작하기 (36 페이지)

페이지 인쇄
Siemens Simatic S7-400 매뉴얼
Micro Automation Set 14
8.
Connect S7-200 "Backup" to S7-200
"Basis" via SCALANCE X108.
9.
Restart S7-200 "Basis".
10.
The USB/PPI cable can now be removed.
Configuring S7-300 "Backup" station with MicroWin project

Table 5-5

No.
1.
Connect the S7-300 CPU to a DC 24V
power supply.
2.
Plug the micro memory module in the
S7-300 CPU.
3.
Switch on the power supply.
4.
Open the included S7-300 project
"Set14_S7-300_V2-0.zip" on the
configuration PC using STEP 7 and make
the following settings in STEP 7:
•
Set the access point in "Set PG/PC
Interface" to "S7ONLINE
TCP/IP(Auto) network controller"
V2.0
Entry ID 21062588
Function
05/18/05
"
S7-200
Basis"
IE cable
S7-200
"
Backup"
IE cable
Comment
CPU 315 PN/DP
64 KB
Live Demo
SCALANCE X108
S
21/35