Siemens Simatic S7-400 매뉴얼 - 페이지 11

{카테고리_이름} Siemens Simatic S7-400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-400 18 페이지. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Siemens Simatic S7-400에 대해서도 마찬가지입니다: 매뉴얼 (35 페이지), 시작하기 (36 페이지)

페이지 인쇄

 Device Setting

To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]

window, select the external device and click [Settings]

To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add

Device] to add another External Device.

 [Equipment Configuration] tab

Setup Items

PLC Type

Target Node

GP-Pro EX Device/PLC Connection Manual

Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver

For the type of External Device to communicate, select any of [S-7-300/400

Series [English Device Names]], [S-7-300/400 Series [German Device Names]],

[S-7-200 Series [English Device Names]] and [S-7-200 Series [German Device

Names]]. Select [English Device Name] or [German Device Name] depending

on whether the device name is described in English or German.

Use an integer from 0 to 126 to enter the node No. of the External Device. Be

sure to set the node No. within the range which does not exceed the value set in

[Highest Node Number] of [Communication Settings].

Setup Description