Siemens Simatic S7-400 시작하기 - 페이지 25
{카테고리_이름} Siemens Simatic S7-400에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Simatic S7-400 36 페이지. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Siemens Simatic S7-400에 대해서도 마찬가지입니다: 매뉴얼 (35 페이지), 매뉴얼 (18 페이지)
페이지 인쇄
Step Action
7
Open WinCC by right-clicking the OS station. WinCC Explorer opens.
•
Navigate to "OS Project Editor" and open it.
•
Confirm with OK to update the faceplates in the WinCC project.
•
8
If you have completed step 5, compile the OS again.
•
9
Activate WinCC Runtime for the operator control and monitoring of the SIRIUS MS PCS7 V71 faceplates.
•
Note
Import of function blocks
Function blocks (FB) are imported with the installation of SIRIUS MS PCS 7 Library
V7.1+SP2.
The update function (see Step 3) will update the functions in the blocks from SIRIUS MS
PCS 7 Library V7.0/V7.1 to the new version.
Note
Block contacts for SFC types
If you change interfaces (block contacts for SFC types) in blocks MS_DIR, MS_DSL,
MS_REV, MS_REV, MS_MEASand MS_STAT, the CPU has to be restarted.
SIRIUS Motor Starter PCS 7 Library "V7.1+SP2"/ "V8 Migration V8.0+SP1"
Getting Started, 08/2013, A5E02897539020A/RS-AA/005
Upgrade to PCS7 V7.1
25