Siemens SIMATIC TP1200 Comfort INOX PCT 간결한 사용 설명서 - 페이지 12
{카테고리_이름} Siemens SIMATIC TP1200 Comfort INOX PCT에 대한 간결한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC TP1200 Comfort INOX PCT 48 페이지. Hmi devices; comfort panels
Siemens SIMATIC TP1200 Comfort INOX PCT에 대해서도 마찬가지입니다: 간결한 사용 설명서 (42 페이지)
페이지 인쇄
Safety instructions and additional information
2.1 General safety instructions
Open equipment and control cabinet
The device constitutes open equipment on the back side
The device constitutes open equipment on the back side. This means that the device may
only be integrated in an enclosure or cabinet which provides front access for operating the
device. The enclosure, the cabinet or the electrical operating rooms must provide protection
against electric shock and the spread of fire. The requirements regarding the mechanical
strength must also be considered.
Access to the enclosure or cabinet in which the device is installed should only be possible
by means of a key or tool and for trained and qualified personnel.
Electrocution risk when control cabinet is open
When you open the control cabinet, there may be a dangerous voltage at certain areas or
components.
Touching these areas or components can cause electrocution.
Always disconnect the cabinet from the mains before opening it.
Observe the safety and accident prevention instructions applicable to your application in
addition to the safety information given in the device documentation.
Strong high-frequency radiation
NOTICE
Observe immunity to high-frequency radiation
The device has an increased immunity to high frequency radiation according to the
specifications on electromagnetic compatibility in the technical specifications.
Radiation exposure in excess of the specified immunity limits can impair device functions
and result in malfunctions and therefore injuries or damage.
Read the information on immunity to high frequency radiation in the technical specifications.
Industrial Security
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the internet if and to the extent such a connection is
12
WARNING
Compact Operating Instructions, 05/2018, A5E38804191-AA
Comfort Panels INOX PCT