Siemens SIMATIC TP1200 Comfort INOX PCT 간결한 사용 설명서 - 페이지 17
{카테고리_이름} Siemens SIMATIC TP1200 Comfort INOX PCT에 대한 간결한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC TP1200 Comfort INOX PCT 42 페이지. Hmi devices; comfort panels
Siemens SIMATIC TP1200 Comfort INOX PCT에 대해서도 마찬가지입니다: 간결한 사용 설명서 (48 페이지)
페이지 인쇄
3.3
Inserting the mounting gasket
The following process describes the use of the mounting gasket for all devices based on the
example of the TP700 Comfort INOX.
The mounting gasket is unsymmetrical and is therefore equipped with a coding tap.
On all mounting gaskets of the INOX devices, the coding tap is on the bottom left in relation
to the rear of the device.
①
②
③
Procedure
Note
Use a new mounting gasket, otherwise the degree of protection specified in the compact
operating instructions cannot be guaranteed.
1. Find the coding tap on the mounting gasket and rotate the mounting gasket as shown in
the figure below.
Comfort Panels INOX, ITC INOX
Compact Operating Instructions, 09/2017, A5E33472156-AI
Seal rounding
Retaining collar
Coding tap
Installing and connecting the device
3.3 Inserting the mounting gasket
17