Siemens SIMATIC TP700 Comfort Outdoor 사용 설명서 - 페이지 26

{카테고리_이름} Siemens SIMATIC TP700 Comfort Outdoor에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC TP700 Comfort Outdoor 29 페이지. Touch-sreen operator control panel
Siemens SIMATIC TP700 Comfort Outdoor에 대해서도 마찬가지입니다: 간결한 사용 설명서 (38 페이지), 간결한 사용 설명서 (42 페이지)

페이지 인쇄

Siemens SIMATIC TP700 Comfort Outdoor 사용 설명서

Atomiser:

The machine will lubricate the blade as it passes through the bushes to prevent

build-up of debris. The mode is either On or Off.

Heaters:

The heaters warm up the product providing a better quality on the cut. The heaters

must be switched on after a power cycle. The different parameters can be set in the

following screen:

Heater Enable Switch: Turn the heating element on/off. The power will also be cut

whenever the machine becomes unsafe or when it

is switched off on the unit itself.

NOTE: the fan will continue to run at the set speed to help

cool the heating element.

Temperature Setpoint: This is where the operator can set the temperature they

wish the heater to produce. This value will also be

show graphically through the gauge which will show the

current set point in relation to the maximum value.

For more technical support, please go to our website: