Siemens SIMATIC TP700 Comfort Outdoor 사용 설명서 - 페이지 9
{카테고리_이름} Siemens SIMATIC TP700 Comfort Outdoor에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC TP700 Comfort Outdoor 29 페이지. Touch-sreen operator control panel
Siemens SIMATIC TP700 Comfort Outdoor에 대해서도 마찬가지입니다: 간결한 사용 설명서 (38 페이지), 간결한 사용 설명서 (42 페이지)
페이지 인쇄
Caterpillar belt speed (Blue Display):
Adjusts individually the transport belt speeds calibrated in 0.1 meters per minute.
Lightly tap the screen within the adjustment area to display input panel and adjust
parameter. Press return key to enter the new value.
Caterpillar belt speed (White Display):
Display the actual speed of the caterpillar.
4.1.2
Cutter
Start/Stop Cut Cycle (Left Button):
To start Cutter cycle, press the green button and it will start the knife motor. Cutting
mode is dependent on cut mode switch, see above. As an indication the button will
turn red plus the knife graphic within the symbol will rotate to indicate movement.
Manual Cut Button (Right Button):
When pressed completes one manual cut. Note only operates when machine is out
of cutting cycle.
Mode parameters pre-set (Blue Display):
Adjusts the length, speed or time. Lightly tap adjustment to display input panel and
enter desired value. Press return key to enter the new value.
Actual mode parameter display (White Display):
Displays the actual length or speed.
4.1.3
Batch
Batch size (Blue Display):
Number of units per batch. Maximum value 999,999 units. If a batch completed
beacon is fitted on the machine it goes off when the performed cuts number is
equal to the batch size specified.
Performed cuts (White Display):
Number of cuts performed by the machine. Double click on the display to reset this
value. If this number reaches the batch size it will be reset automatically.
For more technical support, please go to our website:
www.gillardcutting.com/technical
8