Siemens SIMATIC TP900 Comfort INOX PCT 간결한 사용 설명서 - 페이지 19
{카테고리_이름} Siemens SIMATIC TP900 Comfort INOX PCT에 대한 간결한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMATIC TP900 Comfort INOX PCT 48 페이지. Hmi devices; comfort panels
Siemens SIMATIC TP900 Comfort INOX PCT에 대해서도 마찬가지입니다: 간결한 사용 설명서 (42 페이지)
페이지 인쇄
Mounting the device
3.1
Preparing for installation
3.1.1
Check the scope of delivery
Check the scope of delivery for visible signs of damages caused during transport and for
completeness, see chapter "Scope of delivery (Page 8)".
NOTICE
Damaged parts
A damaged part can cause device malfunctions.
Do not install damaged parts.
In the case of damaged parts or incomplete delivery, contact your Siemens representative.
3.1.2
Checking the operating conditions
Note the following aspects before installing the device:
1. Familiarize yourself with the standards, approvals, EMC parameters and technical
specifications for operation of the device. This information is available in the following
chapters:
– Certificates and approvals (Page 33)
– Electromagnetic compatibility (Page 36)
2. Check the mechanical and climatic ambient conditions for operation of the device; see
Technical specifications (Page 33).
3. Follow the notes on use in the operating instructions.
3.1.3
Permitted mounting positions
The HMI device is suitable for installation in:
● Mounting cabinets
● Control cabinets
● Switchboards
● Consoles
Comfort Panels INOX PCT
Compact Operating Instructions, 05/2018, A5E38804191-AA
3
19