Cisco WS-C3850-24U-E 제품 개요 - 페이지 22
{카테고리_이름} Cisco WS-C3850-24U-E에 대한 제품 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WS-C3850-24U-E 33 페이지. Catalyst 3850 series
페이지 인쇄
LEDs
Network Module LEDs
Figure 10: Network Module LEDs
1
G1 LED
2
G2 LED
Color
Off
Green
Blinking green
Blinking amber
Amber
Catalyst 3850 Switch Hardware Installation Guide
22
Network Module Link Status
Link is off.
Link is on; no activity.
Activity on a link; no faults.
The LED will blink green even when there is very little control traffic.
Note
Link is off due to a fault or because it has exceeded a limit set in the switch software.
Caution
Link faults occur when noncompliant cabling is connected to an SFP or SFP+
port. Use only standard-compliant cabling to connect to Cisco SFP and SFP+
ports. You must remove from the network any cable or device that causes a
link fault.
Link for the SFP or SFP+ has been disabled.
3
G3 LED
4
G4 LED
Product Overview
OL-26779-05