Siemens SIMOGEAR BA 2730 사용 설명서 - 페이지 15

{카테고리_이름} Siemens SIMOGEAR BA 2730에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIMOGEAR BA 2730 30 페이지. Geared motor with encoder for safety-relevant applications
Siemens SIMOGEAR BA 2730에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지)

페이지 인쇄

1. Technical Specifications of the Brake for Encoders for Functional Safety

2.3

Electrical installation of the encoder

Inadequately qualified personnel

If the encoder is electrically installed by inadequately qualified personnel then the functional

safety can be disabled.

Only qualified personnel are authorized to carry out the work.

These persons must be knowledgeable about:

• Topics relating to functional safety

• Legislation, safety regulations and standards for functional safety

• Content of the detailed operating instructions provided

Premature damage or destruction of the encoder

Electrostatic discharge can cause the encoder to fail.

Do not touch the connector pins.

Do not exceed the following tolerances regarding the motor supply voltage according to

EN 60034-1 Range A.

• Voltage ±5 %

• Frequency ±2 %

Especially observe the following topics in the operating instructions Sendix SIL Encoders for

Functional Safety from the Kübler company:

• Functional safety

• Electrical installation, EMC and general notes

• Data transfer to encoder evaluation

Incorrect connection assignment of the encoder

The connection assignment in the operating instructions Sendix SIL Encoders for Functional

Safety from the Kübler company is not applicable for the SIMOGEAR geared motor with

rotary encoder.

The valid connection assignment is coordinated with the geared motor.

Refer to these operating instructions for the connection assignment of the SIMOGEAR

geared motor with encoder.

BA 2730

Operating Instructions, 02/2021, A5E36448105A/RS-AG

WARNING

Securing functional safety

2.3 Electrical installation of the encoder