Siemens SINAMICS G120 매뉴얼 - 페이지 8

{카테고리_이름} Siemens SINAMICS G120에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SINAMICS G120 42 페이지. Using blocksize converters in marine applications
Siemens SINAMICS G120에 대해서도 마찬가지입니다: 시작하기 (46 페이지), 사용 설명서 (32 페이지), 시작하기 (30 페이지), 하드웨어 설치 지침 (2 페이지), 설치 지침 및 사용 설명서 (2 페이지), 설치 지침 (2 페이지), 설치 지침 (2 페이지), 간결한 사용 설명서 (32 페이지), 시작하기 (50 페이지), 장치 설명서 (34 페이지), 빠른 설치 매뉴얼 (2 페이지), 애플리케이션 설명 (50 페이지), 간결한 사용 설명서 (2 페이지), 매뉴얼 (31 페이지), 애플리케이션 매뉴얼 (34 페이지), 간결한 사용 설명서 (2 페이지), 간결한 사용 설명서 (2 페이지)

Siemens SINAMICS G120 매뉴얼
3 Programming Overview

AOI's for SINAMICS G Series drives

3.2
Add On Instructions have been designed for the RSLogix programming that mimic
standard telegrams used in SINAMICS G configurations. For most standard
applications the use of the AOI's can greatly reduce the engineering time needed
to configure a system. The SINAMICS G series drives can also be freely
configured using the free telegram structure, dependent on application needs.
Figure 3-2
3.3

AOI Types

There are presently three Add On Instruction blocks that can be used for standard
telegrams T1, T352, and T111.
Table 3-1
Name
Simple Speed
Vector Speed
EPOS Control
SINAMICS G: Control of a G120 with an Allen-Bradley controller
(Compact/ ControlLogix with RSLogix 5000) via EtherNet/IP
Entry-ID: 82843076,
V4.0,
Standard Telegram #
Telegram 1
Telegram 352
Telegram 111
09/2018
Length
2 words in / 2 words out
6 words in / 6 words out
12 words in / 12 words out
8