Siemens SINAMICS G120P 매뉴얼 - 페이지 7

{카테고리_이름} Siemens SINAMICS G120P에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SINAMICS G120P 18 페이지. Line reactors for power modules pm330
Siemens SINAMICS G120P에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지), 사용 설명서 (26 페이지), 사용 설명서 (34 페이지), 사용 설명서 (24 페이지), 사용 설명서 (22 페이지), 사용 설명서 (26 페이지), 사용 설명서 (22 페이지), 사용 설명서 (22 페이지), 사용 설명서 (18 페이지)

2 Engineering

The PM240-2 power modules for standard applications are available in the

following sizes and supply voltages:

Single-phase, 200V ... 240 V

Three-phase, 200V ... 240 V

Three-phase, 380V ... 480 V

Three-phase, 500V ... 690 V

2.1.2

Basic Operator Panel

The SINAMICS frequency inverter is parameterized using the "SINAMICS G120

Basic Operator Panel 2" (BOP-2). With this panel you parameterize the drive and

acknowledge fault messages.

Note

A detailed description of the "SINAMICS Basic Operator Panel" (BOP-2) can be

found in the operating instructions:

https://support.industry.siemens.com/cs/ww/en/view/109483379

Figure 2-2: Basic Operator Panel

ESC

OFF

Table 2-1: Function of the keys

Key

ESC

OPEN

Pump with SINAMICS G120P

Entry-ID: 109759888,

V1.0.1,

Connection type

MANUAL/AUTO

If the button is pressed for less than 2 seconds, the BOP-2 will return to the

previous screen or, if a value has been changed, the new value will not be

saved.

If the button is pressed for more than 3 seconds, the BOP-2 returns to the

status screen.

When navigating through a menu, the available screens are scrolled by

pressing the up key.

When changing a parameter value, the displayed value is increased by

pressing the key.

09/2019

Performance

0.55 kW ... 4 kW

5.5 kW ... 55 kW

0.55 kW ... 250 kW

11 kW ... 250 kW

Display

Up and Down

Function