Siemens SINAMICS G120P 사용 설명서 - 페이지 9

{카테고리_이름} Siemens SINAMICS G120P에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SINAMICS G120P 18 페이지. Line reactors for power modules pm330
Siemens SINAMICS G120P에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지), 사용 설명서 (26 페이지), 사용 설명서 (34 페이지), 사용 설명서 (24 페이지), 사용 설명서 (22 페이지), 사용 설명서 (26 페이지), 사용 설명서 (22 페이지), 사용 설명서 (22 페이지), 매뉴얼 (18 페이지)

페이지 인쇄

General

Description

Line reactors limit low-frequency line-side harmonics to permissible values.

Risk of burns due to high surface temperature of the line reactor

The line reactors can become very hot. You can get seriously burnt when touching the

surface.

• Mount the line reactors so that contact is not possible. If this is not possible, attach

• To prevent adjacent components from suffering damage due to these high

NOTICE

Damage to the system caused by line reactors that are not permissible

Line reactors that are not permissible can damage the Power Modules.

Line harmonics that damage/disturb other loads connected to the same line supply can also

occur.

• Only use line reactors which are listed in this document.

Note

Malfunctions through magnetic fields

Reactors produce magnetic fields that can disturb or damage components and cables.

• Arrange the components and cables at a suitable distance (at least 200 mm) or shield the

magnetic fields appropriately.

Line reactors

Operating Instructions, 04/2016, A5E32845290B AC

CAUTION

clearly visible and understandable warning notices at hazardous positions.

temperatures, maintain a clearance of 100 mm on all sides of the line reactors.