Siemens SINAMICS G120P VSD 시작하기 매뉴얼 - 페이지 17

{카테고리_이름} Siemens SINAMICS G120P VSD에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SINAMICS G120P VSD 50 페이지.

Locking and unlocking the keypad

To lock the BOP-2 keypad press

press

and

simultaneously for 3 seconds or more.

Screen icons

The BOP-2 displays a number of icons at the left-hand side of the display to indicate the actual state of the

Inverter. These icons are explained in the table below.

Function

Status

Command source

Hand

Inverter status

Inverter and motor running

Jog

Jog function is active

Fault/alarm

Fault or alarm pending

Flashing symbol = Fault

Steady symbol = Warning

6.1.2 Menu structure

Page 17 of 50

and

simultaneously for 3 seconds or more. To unlock the keypad

Icon

Remarks

When the HAND mode is active the icon is

displayed. When AUTO mode is active, no icon

is displayed.

This is a static icon and does not rotate.

If a fault is detected, the Inverter will be stopped

and the user is required to take the necessary

corrective actions to clear the fault. An alarm is

a condition that will not stop the Inverter, for

example, over temperature.

Last Revised: 4/11/2011

Building Technologies