Siemens SINUMERIK 808D 서비스 매뉴얼 - 페이지 29

{카테고리_이름} Siemens SINUMERIK 808D에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SINUMERIK 808D 48 페이지. Connecting with v60 driver
Siemens SINUMERIK 808D에 대해서도 마찬가지입니다: 사용 설명서 (34 페이지), 서비스 매뉴얼 (46 페이지), 지침 (2 페이지), 설치 매뉴얼 (48 페이지)

페이지 인쇄

Reference

You can find detailed description of the alarms in the SINUMERIK 808D/SINUMERIK 808D ADVANCED Diagnostics

Manual.

3.20

OEM PIN forgotten for CNC lock

Fault description

The machine manufacturer or dealer has forgotten the OEM PIN that was assigned during the initial creation and so can no

longer create a valid activation file for the associated control system.

Remedy

The machine manufacturer or dealer must contact the Siemens Hotline and provide the following information to unlock the

machine:

● License certificate (CoL) for the option of the CNC lock function

● Serial number of the CF card

● Serial number of the hardware (PPU)

● Software version of the CNC software

Note

The software version of the CNC software can be found on the PPU HMI through the following operations:

→

After receiving the activation file from the Hotline, the machine manufacturer or dealer can import the file into the control

system to unlock the machine.

The unlocking acts, however, only on the hardware of the control system (PPU). The PLC project is not unlocked. For this

reason, the original PLC project appropriate for the machine must be available.

Service Manual

01/2017