Siemens SINUMERIK 828D Turning 연결 지침 - 페이지 2

{카테고리_이름} Siemens SINUMERIK 828D Turning에 대한 연결 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SINUMERIK 828D Turning 16 페이지. Output of setpoints to analog drives - retrofit solution
Siemens SINUMERIK 828D Turning에 대해서도 마찬가지입니다: 매뉴얼 (49 페이지)

페이지 인쇄

Notice

The OPC UA components can be installed on PCU, NCU and PPU target

systems.

The following steps are necessary to do this:

1. Setting the license

2. Executing the OPC UA configuration dialog

3. Checking the HMI time

4. Performing a restart

In SIEMENS V4.05, there is no user account /password and does not



need to select signature & encryption. The access right of OPC/UA

application program (Client) is rights of local machine operator.

In SIEMENS V4.07, the user needs to use the user account /password



and there is no signature & encryption selection in the user interface.

The access right of OPC/UA application program (Client) is rights of

The user account/password is not allowed to remodify after setting

the login user account / password. Users can adopt the 3

OPC/UA client software program to modify the user

account/password again.

2018/9/17

Version: V1.4

party

Joseph.Sun