Siemens SINUMERIK 840DE SL 운영 매뉴얼 - 페이지 21

{카테고리_이름} Siemens SINUMERIK 840DE SL에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SINUMERIK 840DE SL 33 페이지. Emergency stop button
Siemens SINUMERIK 840DE SL에 대해서도 마찬가지입니다: 장비 매뉴얼 (24 페이지), 장비 매뉴얼 (28 페이지), 장비 매뉴얼 (26 페이지), 장비 매뉴얼 (28 페이지)

페이지 인쇄
Siemens SINUMERIK 840DE SL 운영 매뉴얼
2.6

Display logbook

Use
All NC data activities are chronologically recorded in the log book. An identifier specifies
whether an action has been automatically or manually executed.
The action that was performed is listed in a table together with the time stamp, the name of
the NC data and the operator station.
As an option, the user that executed the action can also be recorded.
The archiving time for the data that has been recorded can be permanently set, in order,
when required, to fulfill the obligation of guaranteeing proof over a lifetime (traceability).
Procedure
MCIS DNC - Direct Numerical Control
Siemens Automation Parts
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0
3.
Press the "OK" softkey.
The variables that have been created are displayed.
4.
Place a checkmark in the checkbox of the variables to activate the filter
condition.
1.
Select the NC file.
2.
Press the ">>" softkey.
The expanded menu is displayed.
3.
Press the "Logbook" softkey.
The "Logbook" window opens and displays all of the information in
conjunction with how DNC handled NC program data at the machine.
Overview of the program data
2.6 Display logbook
21