Epson XP-610 Small-in-One 여기에서 시작
{카테고리_이름} Epson XP-610 Small-in-One에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson XP-610 Small-in-One 2 페이지. Impresora
Epson XP-610 Small-in-One에 대해서도 마찬가지입니다: 빠른 매뉴얼 (17 페이지), 빠른 시작 (4 페이지), (설치 가이드 (2 페이지)
XP-610/XP-810 Small-in-One
Start Here
1
Unpack
2
Turn on and configure
1
2
Caution: Do not connect to your computer yet.
3
Install ink cartridges
Shake the BK (black)
cartridge only.
4
Load paper
Read these instructions before using your product. The illustrations show the XP-810, but the steps
are the same for the XP-610.
1
2
Note: Store the caps in the included
plastic bag. Use them to recap the
ink cartridges after removing them
for storage or disposal.
Printer
®
1
Select your language, country, date and time if applicable.
Note: You can change these settings later using the product's control
panel. For more information, see the online User's Guide.
Note: The cartridges included with the printer are designed for printer set up and
not for resale. After some ink is used for priming, the rest is available for printing.
Caution: Don't turn off the printer or raise the scanner unit while the printer is
priming or you'll waste ink.
Note: Do not open ink
cartridge packages until
2
you are ready to install the
ink. Cartridges are vacuum
packed to maintain reliability.