Siemens SIPLUS CMS4000 IFN VIB-A 사용 설명서 - 페이지 15

{카테고리_이름} Siemens SIPLUS CMS4000 IFN VIB-A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIPLUS CMS4000 IFN VIB-A 27 페이지. Media converter node
Siemens SIPLUS CMS4000 IFN VIB-A에 대해서도 마찬가지입니다: 사용 설명서 (39 페이지), 사용 설명서 (32 페이지), 사용 설명서 (36 페이지)

페이지 인쇄
Siemens SIPLUS CMS4000 IFN VIB-A 사용 설명서
Operating Instructions SIPLUS CMS4000 Wiring
4.5

CABLE-Power

Name:
Application:
Length:
Order numbers:
Picture 12 CABLE-Power
This cable is used for energy supply of the IFN. To forward the power from the first IFN
to the following ones in a line topology IFN ADD must be applied, see. chapter 4.6.
Warning
The IFN device is built to operate with reliable low voltage. Therefore only reliable low voltage
according to IEC950/EN60950/VDE0805 must be connected to the supply connection.
The power adapter for feeding the IFN must fulfil NEC Class 2 (voltage range 18-32 V).
The IFN must not be connected to DC voltage higher than 32 V DC, or to AC voltage.
SIPLUS CMS4000 Cable
Operating Instructions, 06/2017, A5E02298098B-01
CABLE-Power
Power cable
IFN
135cm, 200cm, 500cm, 1000cm
CABLE-Power-135-0000 (135 cm)
CABLE-Power-200-0000 (200 cm)
CABLE-Power-500-0000 (500 cm)
CABLE-Power-1000-0000 (1000 cm) 6AT8000-2AB30-1AB0
6AT8000-2AB30-1AA1
6AT8000-2AB30-1AA2
6AT8000-2AB30-1AA5
15